So i just did a fresh new 100% install of windows 7 on my PC...it will run for about 15-20 mins and then just abruptly with no warning shut down and restart....any tips?
Meh did you try it in safe mode? At least if it is stable there you can check settings, if it's not stable I think you may be sol. Oh and if it is stable you can check your dump files prog I used for trouble shooting is windbg, and you can check windows for faults.
Rebooting instantly without BSOD will not dump so you can't troubleshoot using debugging tools/symbols.
If it does BSOD prior to the reboot then yes, download Windows debugging tools and all symbols.
If it reboots instantly with no warning there are a few suspects.
Heat, Faulty Power supply or at worst a mainboard problem
Generally speaking if it is cpu or memory related you should get a BSOD. However, you may wish to run memtest x86 (free) from cd and see if it catches a bad memory dimm. Also, you could try some of the floating point math programs to catch cpu and something like ati tool or benchmark to hammer on the gpu.
Rebooting instantly without BSOD will not dump so you can't troubleshoot using debugging tools/symbols.
If it does BSOD prior to the reboot then yes, download Windows debugging tools and all symbols.
If it reboots instantly with no warning there are a few suspects.
Heat, Faulty Power supply or at worst a mainboard problem
Generally speaking if it is cpu or memory related you should get a BSOD. However, you may wish to run memtest x86 (free) from cd and see if it catches a bad memory dimm. Also, you could try some of the floating point math programs to catch cpu and something like ati tool or benchmark to hammer on the gpu.
Hope this helps
Good point about the BSOD, but I think windows has tools where you can read about restarts my computer has been stable for so long I can't remember the name of the log. But I do believe in safe mode you can at least read all of the logs and start drawing a picture. Thanks for reminding me and lets hope she stays stable a couple more years, lol.
To check, go to start then control panel then systems and security then go into power options and finely go to edit plan settings and change the settings.
fresh new install because im selling the system so wanted to get all my old stuff off. Had windows 7 before. Did a memory test and passed with flying stars no errors...so im going to put new thermal compound on the cpu then go from there i guess...i have a feeling its the PS though....
Computer Management > System Tools > Windows Logs > System and/or Application logs. Look for Critical, Errors and Warnings and any Information entries near those.
"I used to think the worst thing in life was to be all alone. It's not. The worst thing in life is to end up with people who make you feel all alone." Robin Williams
Someone I knew once had a computer problem where when they plugged in a usb stick, the computer would restart. So I just went to the device manager and updated their usb drivers and it was fixed. Maybe there are some motherboard drivers you need to install.
Originally posted by fayknaym Someone I knew once had a computer problem where when they plugged in a usb stick, the computer would restart. So I just went to the device manager and updated their usb drivers and it was fixed. Maybe there are some motherboard drivers you need to install.
That is usually caused by damaged electric contacts in the USB port coming into contact with the grounded port sleeve. The damage is usually caused by someone forcing in a USB device. This can cause enough damage that the mother board needs to be replaced.
"I used to think the worst thing in life was to be all alone. It's not. The worst thing in life is to end up with people who make you feel all alone." Robin Williams
Originally posted by Scypheroth So i just did a fresh new 100% install of windows 7 on my PC...it will run for about 15-20 mins and then just abruptly with no warning shut down and restart....any tips?
Gremlins...
Hope to build full AMD system RYZEN/VEGA/AM4!!!
MB:Asus V De Luxe z77 CPU:Intell Icore7 3770k GPU: AMD Fury X(waiting for BIG VEGA 10 or 11 HBM2?(bit unclear now)) MEMORY:Corsair PLAT.DDR3 1866MHZ 16GB PSU:Corsair AX1200i OS:Windows 10 64bit
Originally posted by Grunty Originally posted by fayknaymSomeone I knew once had a computer problem where when they plugged in a usb stick, the computer would restart. So I just went to the device manager and updated their usb drivers and it was fixed. Maybe there are some motherboard drivers you need to install.
That is usually caused by damaged electric contacts in the USB port coming into contact with the grounded port sleeve. The damage is usually caused by someone forcing in a USB device. This can cause enough damage that the mother board needs to be replaced.
I've seen this too - your not supposed to be able to plug in a USB device upside down, but there's no substitute for brute force.
Comments
Meh did you try it in safe mode? At least if it is stable there you can check settings, if it's not stable I think you may be sol. Oh and if it is stable you can check your dump files prog I used for trouble shooting is windbg, and you can check windows for faults.
Good luck.
hey ^^
if the machine is rebooting "normally", i would say, its the windows updates.
Normally there pops a window, maybe you know that, "reboot in 10mins" that hides often behind other applications.
I suggest you check for and make the windows updates first, so there is an end on that.
Then you want to upgrade your gfx-card drivers, maybe you did that also already.
It can be a thermal problem, bugged hardware, hmm there is some other possibilities.
Let me ask, have you upgraded from something older to Win7 or have you had Win7 already in use ?
If you had it in use, why have you reinstalled ?
Rebooting instantly without BSOD will not dump so you can't troubleshoot using debugging tools/symbols.
If it does BSOD prior to the reboot then yes, download Windows debugging tools and all symbols.
If it reboots instantly with no warning there are a few suspects.
Heat, Faulty Power supply or at worst a mainboard problem
Generally speaking if it is cpu or memory related you should get a BSOD. However, you may wish to run memtest x86 (free) from cd and see if it catches a bad memory dimm. Also, you could try some of the floating point math programs to catch cpu and something like ati tool or benchmark to hammer on the gpu.
Hope this helps
Good point about the BSOD, but I think windows has tools where you can read about restarts my computer has been stable for so long I can't remember the name of the log. But I do believe in safe mode you can at least read all of the logs and start drawing a picture. Thanks for reminding me and lets hope she stays stable a couple more years, lol.
It could be that your time display is on.
To check, go to start then control panel then systems and security then go into power options and finely go to edit plan settings and change the settings.
Does it boot OK in safe Mode?
If So then reformat, If not then it's the hard-drive or a driver issue(probably)
That is usually caused by damaged electric contacts in the USB port coming into contact with the grounded port sleeve. The damage is usually caused by someone forcing in a USB device. This can cause enough damage that the mother board needs to be replaced.
Gremlins...
Hope to build full AMD system RYZEN/VEGA/AM4!!!
MB:Asus V De Luxe z77
CPU:Intell Icore7 3770k
GPU: AMD Fury X(waiting for BIG VEGA 10 or 11 HBM2?(bit unclear now))
MEMORY:Corsair PLAT.DDR3 1866MHZ 16GB
PSU:Corsair AX1200i
OS:Windows 10 64bit
I've seen this too - your not supposed to be able to plug in a USB device upside down, but there's no substitute for brute force.